Battery Powered Systems

Home > Motors > Motors Permanent Magnet (High Efficiency) >

Motor Scott PM DC 1+ hp 24 Volts Vented Plus

Our Price: $395.00

Availability: Usually Ships in 24 Hours
Product Code: MO-SC-4BB2488-V

Qty:

Description

This Motor has a Vented End Cap (not shown in this picture but can be found on the UP-Grade Motor) and Special High Cooper Brushes to reduce Heat buildup and increase the Continuous HP Rating. This Motor is usually mounted by the Faceplate using four 1/4" tapped bolt holes. You can also request the Base Plate Mount shown on the standard Un-Vented Scott 1 HP Motor. Just put a note in the Check-out order notes section and we will throw this base mount in for Free.

Horsepower Rating: 1+

RPM: 2800
Voltage: 12-24
Amps: 40+

Weight: 12 lbs.
These motors are ideal for Electric Vehicles up to 300 lbs. including Driver weight.

Used for light Electric Motorcycles, Electrathons, Scooters, and general industrial applications.

Reliability is higher than separately excited field motors due to fewer electronic parts and no possibility of shorting out the field. They operate more efficiently at lower speed control than separately excited field motors as well, and produce more horsepower in a smaller, lighter motor. Horsepower ratings on these motors are the nominal rating at the motors most efficient operation. Each motor can deliver considerably higher HP for intermittent periods during actual use.