One minute Current: 200A

Continuous Current: 80A

• Please use special RS232 cable that we sell to program the controller. RS-232 cable: $19

• Intelligence with powerful microprocessor.

• Synchronous rectification, ultra low drop, fast PWM to achieve very high efficiency.

• Current limit and torque control.

• Low EMC.

• Battery protection: current cut back, shutdown and warning at low battery

 Thermal enhanced rugged aluminum housing. Push-on connectors. Plated copper bus.

•Thermal protection: Current cut back on low temperature and high temperature to protect battery and controller.

• No adjustment required.

• High side switch inputs to maximize safety.

• Simple installation - uses a two wire 0-5K throttle pot.

• Throttle or brake sensor open wire detection and protection.

• High pedal protection: Disable operation if turning key on while throttle applied.

• Configurable with RS-232. Windows GUI provided.(PLEASE USE SPECIAL CABLE SUPPLIED BY US)

Optional Features (Terminals available on back side)

• PWMable Peak and Hold Main Contactor or Reverse Contactor Driver. Save energy and protect contactors!.

• PWMable Reverse Alarm , SpeedO Meter or Battery Meter Output.

• Brake Switch for regeneration.

• Analog Brake Input for continuous variable regeneration.

• Speed Control Switch to active speed control mode.

• Throttle Foot Switch as safety feature.

• Second Throttle Input (5K - 0K) as safety feature.

• High Side Drive to armature to minimize EMC and maximize safety and reliability. (Promotion! Free of charge!)


Specifications

• Frequency of Operation: 16.6kHz.

• Standby Current: less than 15 mA.

• Standard Throttle Input: 0-5k ohms ±10%(others available).

• Full Power Operating Temperature Range:-30°C to 90 °C,100°C shutdown (controller temperature).

• Peak and Hold Main contactor or Reverse Relay Driver: 3A peak, 1A hold.

• Meter or Alarm Output: 200mA.

Download Kelly KD Controllers Configurable Program V2.4

Kelly KD Controllers Configuration Program Online Demo / Help