|
|
|
|
 |
Controller Alltrax AXE4834 Programmable

24-48 Volt Systems, 300 amps peak fully programmable, comes pre-programed as standard, plug in your computer (must be running XP) with standard serial cable and load Downloadable Software
|
|

Our Price: $339.95
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Alltrax AXE4844 Programmable

24-48 Volt 400A fully programmable. Just plug into your computer (must be running XP) with standard serial cable and load with downloadable software
|
|

Our Price: $399.95
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Alltrax AXE4845 Programmable (High Power)

24-48 Volt 400A fully programmable. Higher Power continuos version of the 400 amp Alltrax. 1205 footprint (2" longer than the 1204's)
|
|

Our Price: $449.00 Sale Price: $434.50 You Save $14.50!
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Alltrax AXE4855 Programmable

24-48 Volt 500A fully programmable. 1205 footprint (2" longer than the 1204's)
|
|

Our Price: $567.50
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Alltrax AXE4865 Programmable

24-48 Volt 650 A fully programmable. Just plug into your computer (must be running XP) with standard serial cable and load with downloadable software
|
|

Our Price: $598.50
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Alltrax DCX300G19 Regen Yamaha Sep/Ex

DCX300G19 Regen 300 amp peak. Throttle Input: 0-1K The DCX300G19 is intended to be a bolt in replacement to the standard controller found in Yamaha cars
|
|

Our Price: $549.00
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Alltrax DCX400G19 Regen Yamaha

DCX400G19 High Performance Regen 400 amp peak. 0-1K The DCX400G19 is intended to be a bolt in replacement to the standard controller found in Yamaha cars. The DCX400G19 offers increased torque and acceleration.
|
|

Our Price: $659.00
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Alltrax DCX600G19 Amp Regen Yamaha Sep-Ex

DCX600G19 High Performance Regen 600 amp peak. Throttle Input: 0-1K The DCX600G19 is intended to be a bolt in replacement to the standard controller found in Yamaha cars. The DCX600G19 offers increased torque and acceleration.
|
|

Our Price: $995.00
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Alltrax NPX4834 300 Amp Non-Programmable

Simular to the Curtis 1204 Controllers but more powerful and much less Expensive!
|
|

Our Price: $279.00 Sale Price: $275.00 You Save $4.00!
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Alltrax NPX4844 400 Amp Non-Programmable

Similar to the Curtis 1204 Controllers but more powerful and much less Expensive!
|
|

Our Price: $329.00 Sale Price: $324.00 You Save $5.00!
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Curtis 1204-4xx, 36-48VDC, 275A Special Club Car, 5-0K Input, Plug Braking

36-48 Volt, 275 Amp, 0-5K Throttle input, Plug Braking
|
|

Our Price: $399.00
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Curtis 1204-4xx, 36-48VDC, 450A Hi-Power Special Club Car, 5-0K Input, Plug Braking

36-48 Volt, 450 Amp, 0-5K Throttle input, Plug Braking
|
|

Our Price: $399.00
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Yamaha G14/G16

24-36 Volt, 400 Amp, 0-1K Throttle input, Plug Braking
|
|

Our Price: $349.00
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Yamaha G19

36-48 Volt, 275 Amp, 0-5K Throttle input, Plug Braking
|
|

Our Price: $328.50
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Controller Yamaha G19 High Power

36-48 Volt, 450 Amp, 0-5K Throttle input, Plug Braking
|
|

Our Price: $359.00
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Motor & Controller Sep/Ex 36 VDC 19 Tooth DCS Regen 300 Amp

Used on EZ-Go, Yamaha, Melex and Columbia DCS (Drive Control System) with 300 amp controller Mounts on 19 Tooth Female Spline Coupler with the Dana H12 Axle 7.0 Peak HP @ 3250 Rpm
|
|

Our Price: $789.95
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Motor & Controller Sep/Ex 36 VDC 19 Tooth DCS Regen 400 Amp

Used on EZ-Go, Yamaha, Melex and Columbia DCS (Drive Control System) with 400 amp controller Mounts on 19 Tooth Female Spline Coupler with the Dana H12 Axle 8.5 Peak HP @ 3250 Rpm
|
|

Our Price: $869.95
|
|
Qty
|
Add
|
|
 |
|
|
|
|
 |
Plug Braking Option for Alltrax AXE Controllers

Alltrax AXE Plug Braking Option for Series Wound Motors Click this item and the Controller item to add both Items to your "Shopping Cart" at the same time. You will receive a controller with the "Plug Braking" option.
|
|

Our Price: $29.95
|
|
Qty
|
Add
|
|
 |
|
To add the above items to your cart, click the "Add" checkboxes then click "Add To Cart" >>>
|